A Quick Overlook of Staining – Your Cheatsheet

An Introduction to Deck Staining Having your cedar deck refinished can seem to be a daunting project in the beginning. But it is vital for preventing your wood decking material from fading and decaying. With the right knowledge coupled with some helpful tips, you can quickly master re-staining of decks. Here are the responses to a few commonly asked questions. How soon should I stain a fresh cedar deck. Let your deck dry in the sun for a couple of days before applying stain to remove excess moisture and allow the stain to penetrate properly. In case the deck was constructed in winter, you might have to postpone staining until springtime.
A Beginners Guide To Decks
When is the best time.
Practical and Helpful Tips: Options
For best results, do refinish and cleaning every 2-3 years. You will need a great stretch of mild, dry climate for staining your deck. Give it at least three days from the last rain and ensure you will have a day or two of dry weather following its application. Do not stain when it is too hot, which can prevent the stain from penetrating. For the best results, apply the stain when it is cooler outside, preferably in the morning. What should I do first when staining my deck. Ensure that the deck is in the proper condition to be stained. That is certainly, how good the wood quality is. You may need to sand it for a smooth surface if the wood is in need of some re-conditioning. After that, give your deck a proper cleaning to remove as much dirt and preceding coatings as possible. Should you use the pressure washer, use the proper amount of water pressure, or you run the risk of damaging the wood. Dry it properly after cleaning. Cleaning products to use. To ensure deep penetration into the wood and cleaning to its original state, use oxygen bleach. Oxygen bleach is safe for wood, unlike the typical household bleach which is incredibly harmful to both the brushes and wood. Oxygen bleach is a powder that releases oxygen ions into warm water that is hot, creating a deep cleanse solution perfect for wood that is dry. The type of stain to use. Deck stains come in three primary groupings: clear, semi-transparent and opaque. Transparent deck stains are clear and ultimately maintain the normal color of the wood while shielding it from harmful elements. Because of the lack of pigmentation, annual reapplication is deemed necessary to avoid fading. Semitransparent deck stains supply a greater degree of protection than clear while permitting some of the natural wood colors to come through. They have a UV-blocking protective tint that allows less frequent applications. Its reapplication can be done once every two years. Solid deck stains are completely pigmented and cover the wood’s natural color. It will give you the most protection from the sunlight but are very similar to paint in that they will form a film may eventually start peeling off. This brings about early wearing out that will have to be handled at the beginning signs of fading.